This course will update experienced ISE software users to utilize the Vivado Design Suite. Learn the underlying database and static timing analysis (STA) mechanisms. Utilize Tcl for navigating the design, creating Xilinx design constraints (XDC), and creating timing reports. Learn to make appropriate timing constraints for SDR, DDR, source-synchronous, and system-synchronous interfaces for your FPGA design. You will also learn to make path-specific, false path, and min/max timing constraints, as well as learn about timing constraint priority in the Vivado timing engine. Finally, you will learn about the scripting environment of the Vivado Design Suite and how to use the project-based scripting flow. You will also learn the FPGA design best practices and skills to be successful using the Vivado Design Suite. This includes the necessary skills to improve design speed and reliability, including: system reset design, synchronization circuits, optimum HDL coding techniques, and timing closure techniques using the Vivado software. This course encapsulates this information with an UltraFast design methodology case study. The UltraFast design methodology checklist is also introduced.
Release dateJune 2016
Training duration3 days
PriceUSD 2400 or 24 Training Credits
Course Part NumberFPGA-VAXDC4ISE
Who Should Attend?Existing Xilinx ISE Design Suite FPGA designers
- FPGA design experience
- Completion of the Essentials of FPGA Design, Designing for Performance, or Advanced FPGA Implementation courses or equivalent knowledge of Xilinx ISE software implementation tools, techniques, architecture, and FPGA design techniques. Completion of the Vivado Design Suite for ISE Project Navigator Users course is strongly recommended.
- Intermediate VHDL or Verilog knowledge
- Vivado System Edition 2016.1
- Architecture: UltraScale™ and 7 series FPGAs
- Demo board: None
Skills gainedAfter completing this comprehensive training, you will have the necessary skills to:
- Access primary objects from the design database and filter lists of objects using properties
- Describe setup and hold checks and describe the components of a timing report
- Create appropriate input and output delay constraints and describe timing reports that involve input and output paths
- Explain the impact that manufacturing process variations have on timing analysis and describe how min/max timing analysis information is conveyed in a timing report
- Describe all of the options available with the report_timing and report_timing_summary commands
- Describe the timing constraints required to constrain system-synchronous and source-synchronous interfaces
- Analyze a timing report to identify how to center the clock in the data eye
- Create scripts for the project-based and non-project batch design flows
- Describe the UltraFast design methodology checklist
- Identify key areas to optimize your design to meet your design goals and performance objectives
- Define a properly constrained design
- Optimize HDL code to maximize the FPGA resources that are inferred and meet your performance goals
- Build resets into your system for optimum reliability and design speed
- Build a more reliable design that is less vulnerable to metastability problems and requires less design debugging later in the development cycle
- Identify timing closure techniques using the Vivado Design Suite
- Describe how the UltraFast design methodology techniques work effectively through case study/lab experience
- Accessing the Design Database
- Demo: Finding Objects
- Demo: Object Properties
- Demo: Object Connectivity
- Lab 1: Vivado IDE Database
- Introduction to Clock Constraints
- Demo: Introduction to Clock Constraints
- Lab 2: Introduction to Clock Constraints
- Setup and Hold Timing Analysis
- Generated Clocks
- Demo: Generated Clocks
- I/O Constraints and Virtual Clocks
- Lab 3: I/O Constraints and Virtual Clocks
- Static Timing Analysis and Clocks
- Introduction to Timing Exceptions
- Lab 4: Introduction to Timing Exceptions
- Advanced Timing Analysis
- Demo: Introduction to Vivado Timing Reports
- Source-Synchronous I/O Timing
- Lab 5: Source-Synchronous I/O Timing
- System-Synchronous I/O Timing
- Demo: System-Synchronous I/O Timing
- Scripting in Vivado Design Suite Project Mode
- Lab 6: Scripting in Vivado Design Suite Project Mode
- UltraFast Design Methodology Case Study
- Demo: UltraFast Design Methodology Checklist
- UltraFast Design Methodology
- HDL Coding Techniques
- Lab 7: Resets
- Lab 8: Inference
- Synchronization Circuits
- Demo: Synchronization Circuits
- Demo: Baselining
- Timing Closure and Design Conversion Lab Introduction
- Lab 9: Timing Closure and Design Conversion
- Lab 10: Pipelining
- Register Duplication
- Physical Optimization
- I/O Flip-Flops
- Lab 1: Vivado IDE Database - Explore the Vivado IDE database using Tcl commands. Use the Tcl Console to evaluate and enter IOB properties.
- Lab 2: Introduction to Clock Constraints - Create complete XDC constraints for the clocking resources in a design. Implement the design and use the available clocking reports to verify results. Understand the first step in the Xilinx baselining recommendation.
- Lab 3: I/O Constraints and Virtual Clocks - Create input and output constraints for a source-synchronous design by using the Timing Constraints utility. You will also generate useful timing reports to verify the timing results. Understand the second step in the baselining recommendation.
- Lab 4: Introduction to Timing Exceptions - Use the Timing Constraints window to enter timing exceptions in the XDC format. You will also generate a useful timing report to verify the timing results. Understand the third and last step in the baselining recommendation.
- Lab 5: Source-Synchronous I/O timing - Make I/O timing constraints for a source-synchronous, double data rate (DDR) interface. Perform a static timing analysis of the interfaces to determine the optimal clock and data relationship for maximum setup and hold-time margin. Finally, adjust the data path delay to realize the optimal timing solution.
- Lab 6: Scripting in Vivado Design Suite Project Mode - Write Tcl commands in the project-based flow for the design process (from creating a new project through implementation).
- Lab 7: Resets - Investigate the proper design and use of resets. Examine the impact of seeing a design built originally with asynchronous resets, having resets removed, and finally with synchronous resets only used where necessary.
- Lab 8: Inference - Evaluate the implementation results of a design that uses asynchronous resets and infers more dedicated hardware resources when resets are selectively removed from the design. You will also learn how to infer the DSP hardware resources for other common functions required by most FPGA designs.
- Lab 9: Timing Closure and Design Conversion - Learn how a generic processor design was optimized for the 7 series device architecture with basic design changes that impacted the dedicated hardware usage, design speed, and the device utilization.
- Lab 10: Pipelining - Explore how pipelining can improve performance (increased clock rate and throughput) and facilitate timing closure.
Please download the respective PDF of your course: *
* The course version can be found in the training registration form